Building Emergency Procedures
Fire Alarm Pull Stations
Pull stations are located on each floor in the elevator lobby, at each building exit, and at the entrance to each emergency exit stairwell. In case of fire in or near your tenant space, activate the nearest pull station regardless of whether or not the alarm signal has already sounded. In addition, call the Fire Department and Building Security.
Fire Life Safety Speaker System
The building is equipped with a life safety speaker system with the capability of notifying all floors, simultaneously or individually, of emergency situations. For the hearing impaired, strobe lighting will be activated, signifying an alarm situation. Special instructions may be broadcast from the Fire Control Room through the ceiling speaker system, which is audible in all tenant spaces and public area.
Sprinklers and Smoke Detectors
The building is fully sprinklered and each floor is equipped with smoke detectors. Each system operates independently and automatically. Smoke or heat will activate the alarm signal on that floor, the floor above and the floor below. The alarm will also be activated in the Fire Control Room.
The elevators will automatically be recalled to the Mezzanine level lobby once a pull station alarm and/or an elevator lobby smoke detector is activated. The elevators will not respond to the lobby call buttons, and they shall not be used for evacuation.
Building Emergency Status Line
408 520 2030
In the event of an emergency, this line will be updated with recorded messages as new information is received by the building office.